Differences

This shows you the differences between two versions of the page.

--- project_people:josh_donckels [2017/11/27 17:13] – jdonckels
+++ project_people:josh_donckels [2017/12/10 20:01] (current) – jdonckels
@@ Line 1: / Line 1: @@
-===== Project Idea =====
+===== Project Concept =====
-Implement a convolutional neural network (CNN) that will be able to classify an input image.  It will use the layers based around a very basic CNN including: convolution layer, pooling layer, rectifier layer, and a fully-connected layer.  This will have to start off static in the MFM, as passing data would be very difficult otherwise.  This will require five elements that I will go into detail further down this page.
+Implement a convolutional neural network (CNN) that will be able to classify an input pattern (a 3x3 window on the MFM).  It will use the layers based around a very basic CNN including: convolution layer and a fully-connected layer.  This will have to start off static in the MFM, as passing data would be very difficult otherwise.  This will require five elements that I will go into detail further down this page.
 ===== Elements =====
   * Neuron:
     * Will contain the weights from the pre-trained network that it will be using to classify the image
-    * Deal with all of the computations for the convolution, pooling, normalization, and fully-connection
+    * Deal with all of the computations for the convolution
     * Will update the neighboring pixels based on the output from the computation
-  * Pixel
+  * Init_Layer:
-    * Holds the gray-scale value for 7 pixels, then has space for a couple more bits for flags in the future
+    * This is the middle Neuron, which will initialize, reset, and repair all of the other Neurons in the specific filter
-  * Router
+    * This will also contain its own weight, and bias which will be summed into the total from the filter
-    * Will hold routing information based on which way for a packet to go based on where it is going
+  * FC_Neuron:
-  * Path
+    * Neurons for the fully-connected layer, which will used fixed point multiplication to calculate its values.
-    * Will help with guiding the packets to the specified Neuron cluster
+    * There will be four layers of 12, which will each represent a pattern to be classified
-  * Packet
+  * FC_Init_Layer:
-    * Will hold information about 7 pixels, and will follow the path and routers to its destination to deliver the information
+    * Will initialize, reset, and repair the FC_Neurons in each layer
+  * Label:
+    * Will be used to classify the network once it is complete, meaning the FC_Layer_Twelve will create this once the the classification values are complete
-===== Goals ======
-   * Main Goal: Run a simple MNIST example with smaller training set of 0's, of image size 18x18(?)
-     * First Step: Get a layout that will work for the CNN (X)
-     * Second Step: Get 7 packets sent from one cluster of pixels to another cluster of pixels ( )
-     * Third Step: Get pixel packets from all other clusters of pixels to one Neuron cluster, then run that specific convolution layer over all pixels from the image  ( )
-     * Fourth Step: Get the above goal to work with all clusters of Neurons ( )
-     * Fifth Step: Implement the pooling step ( )
-     * Sixth Step: Set-up the rectifier layer ( )
-     * Seventh Step: Create the fully-connected outcome ( )
-     * Eight Step: Classify the image  ( )
 ===== Weekly Logs =====
@@ Line 91: / Line 83: @@
    *Redesigned fully-connected layer, to where it can classify four different patterns at any rotation
      * Box, two-length line, L shape, and a three-length line, I get a global max of 77.5% class rate
+     * Went back to three as I was running into problems and I get consistent 85% classification rate
    * Improved paper, still need more plots for results and an improved discussion
+     * Finished Paper!
+Week 15 Update:
+   *Improved slides, and practiced presenting.
+   *Finished everything and turned it in.