User Tools

Site Tools


dev:clone_from_github

This is an old revision of the document!


Cloning From Github

Cloning the repo from Github seems relatively straight forward, but there are some dependencies that need to be installed in order to get the source to build. Here is a full tutorial describing how to build the MFM software from the source.

Note: This tutorial is performed on Ubuntu 14.04 . Your installation procedure may vary.

Install git

First, you will need to install git. This can be done with a package manager, such as apt-get:

sudo apt-get install git

Install g++

You will need g++ in order to build the software. Simply use your package manager to download it:

sudo apt-get install g++

Cloning the Repository

Next, you will need to clone the codebase to your computer. To do this, browse to the folder which you would like to contain the repo and clone:

git clone https://github.com/Sixstring982/MFMv2.git

Install SDL

The MFM software uses SDL to render to a window, play audio, and render fonts.

The MFM software needs SDL version 1.2 . Do not install SDL 2.0!

You will need to install the following packages with your package manager:

sudo apt-get install libsdl1.2-dev
sudo apt-get install libsdl-image1.2-dev
dev/clone_from_github.1409718704.txt.gz · Last modified: 2014/09/02 22:31 by tsmall1